ISDN "only data" adapters

ISDN-BRI S0 only data

Other adapters



ISDN-BRI S0 "only data" adapters top

Two versions of this adapter exist. They both provide the same functionalities, but differ only in the way they have been manufactured and jumpers/switches configuration.

 ISDN S0 "only data" adapter provides the following services, it also has the following interfaces:

In each Abilis CPX it is possible to plug in up to 3 ISDN-BRI S0 adapters.

ISDN solo dati ITK
Figura 15. ISDN S0 only data "ITK" adapter.

Tabella 16. ISDN S0 ITK, jumpers JP1.
Base address JP1/ADD   IRQ JP1/IRQ
1 2 3 4
0x390 CL CL   11 CL CL
0x398 op CL 10 op CL
0x3A0 CL op 5 CL op


ISDN solo dati SpeedCard
Figura 16. ISDN S0 only data "SpeedCard" adapter.

Tabella 17. ISDN S0 SpeedCard, switch SW1.
Base address SW1
1 2 3 4 5 6 7 8
0x390 ON off ON ON off off off off
0x398 off off ON ON off off off off
0x3A0 ON ON off ON off off off off

For correct jumpers/switches configuration, depending on the sotfware one, refer to the chapter Port numbering and adapters configuration.

printPrint this page